Design Lab

Design it, then prove it

One workspace for the three kinds of proving this platform needs: a part bench for the hardware, a screen-flow designer that writes its own test suite, and an acceptance check that scores a spec against its bands.

Building systems bench

Design parameters

Clear span · 7 m

Slab thickness · 250 mm

Reinforcement ratio · 1.2 %

Simulated test results

Pass · 3/3

Bending utilisationTarget ≤ 1.00	0.48 × capacity
Mid-span deflectionTarget ≤ 19 mm	5.4 mm
Design service lifeTarget ≥ 50 yr	55 years

Results come from the structural model in this page. They compare design choices against internal limits, not a stamped engineering calculation — a licensed engineer must verify anything built.